ADRV9002 vs ADRV9004

Software Defined Radios of all Types
User avatar
IB4TL
Member
Member
Reactions:
Posts: 5364
Joined: Mon Nov 05, 2018 6:02 pm

ADRV9002 vs ADRV9004

#1

Post by IB4TL »


The ADRV series of chips from Analog Devices are used in software-defined radio platforms. With built-in dual transceivers they enable a range of functionality that’s not possible with other SDRs.

Image
ADRV9004
In this post we look at the main differences between the ADRV9002 and ADRV9004. On the surface, they look identical. However there is one major difference.

Let’s get into the details.
Summary Table
This table summarizes the specifications of the two products.
SpecificationADRV9002ADRV9004Frequency Range30 MHz to 6000 MHz30 MHz to 6000 MHzTransceivers2 * Tx + 2 * Rx2 * Tx + 2 * RxIF Bandwidth12 kHz to 40 MHz12 kHz to 40 MHzInterface ProtocolsLVCMOS SSI, LVDS SSI, SPILVCMOS SSI, LVDS SSI, SPIRx Image Rejection85 dB85 dBRx Noise Figure12 dB12 dBRx Input IP3+27 dBm+27 dBmTx Output IP3+30 dBm+30 dBmDPD LinearizationUp to 20 MHzN/A
As can be seen from the table, almost all the specifications are identical.
Difference between ADRV9002 and ADRV9004
The only difference between the ADRV9002 and ADRV9004 is DPD (Digital Pre-Distortion) Linearization. The ADRV9002 has this capability and as a result is better suited for signal transmission.
What does DPD do?
The Digital Pre-Distortion function compensates for non-linearity in the response of the Transmit Power amplifier. The result is a linear output from the PA.
What is the benefit of DPD?
The DPD capability allows the transceiver to drive the PA closer to saturation. This facilitates a higher efficiency power amplifier while maintaining linearity.
Summary
In this post we have explained the differences between the ADRV9002 and ADRV9004. The two products are very similar. However the ADRV9002 is better suited for transmitter applications.

Both products are in the $300+ price range in large quantities, so they are better suited to software-defined radios at a higher price point. None of the SDRs in the $500 or less price range that we have reviewed for instance use these parts.
The post ADRV9002 vs ADRV9004 appeared first on OneSDR - A Wireless Technology Blog.


Source: https://www.onesdr.com/adrv9002-vs-adrv9004/
Chow
IB4TL

Return to “Software Defined Radios”

Who is online

Users browsing this forum: No registered users and 1 guest