Demonstrating Solar Inverter Noise Cancelling with a Timewave ANC-4 and Airspy HF+

Software Defined Radios of all Types
User avatar
IB4TL
Member
Member
Reactions:
Posts: 2011
Joined: Mon Nov 05, 2018 6:02 pm

Demonstrating Solar Inverter Noise Cancelling with a Timewave ANC-4 and Airspy HF+

#1

Post by IB4TL »

At his house W1VLF found that his solar inverter was causing huge amounts of interference on the HF bands, essentially making any hope at receiving shortwave or amateur radio signals impossible on his Airspy HF+ Discovery . However, over on his YouTube channel he's demonstrated a solution that allows him to almost completely cancel the noise. The solution involves using a Timewave ANC-4 noise canceler, which is as analog noise cancelling device available from the manufacturer for US$209.95. To use the device you also need a noise probe which can be a small loop antenna. The noise probe is connected to the ANC-4 and placed near the source of the noise, which in W1VLF's case was just on the solar inverter enclosure mounted on the outside of his house. Then by tuning the gain and phase knobs on the ANC-4 the noise can be cancelled out of the signals received by the main antenna.  In the video W1VLF demonstrates how effective noise cancelling with the ANC-4 can be by showing the before and after results with his Airspy HF+ Discovery. Kicking Solar inverter noise in the A$$ with noise cancelling
Chow
IB4TL

Who is online

Users browsing this forum: No registered users and 0 guests